产品详情
  • 产品名称:压缩歪度试验仪

  • 产品型号:SZ-6615
  • 产品厂商:SUNZERN/轩准
  • 产品价格:3000
  • 折扣价格:2500
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
压缩歪度试验仪用于橡胶静态压缩试验。取标准试样夹于本机平板之间,旋转螺丝压缩试样至一定比率,再放进设定了试验温度的烘箱(另购)中,经规定的时间后取出,拆下试样冷却30分钟,*后测试其厚度,根据压缩变形率公式求出其压缩歪度:(压缩前厚度-压缩后厚度)÷(压缩前厚度-间隔板厚度)×100
详情介绍:

压缩歪度试验仪参考标准:

1. GB/T 7759-1996 idt ISO 815:1999 硫化橡胶、热塑性橡胶常温、高温和低温下压缩长久变形测定

2. ASTM D 395-2008 橡胶性能的标准试验方法.压缩长久变形

3. JIS K 6262-2006 硫化或热塑性橡胶.在常温、高温或低温下的压缩长久变形测定规格参数

压缩歪度试验仪规格参数:

1. 橡胶试样规格:Ø28.68D12.7mm

2. 发泡塑胶试样规格:L50×W50×D25mm

3. 主机尺寸:约W200×D120×H250mm

4. 主机重量:约11kg

※ 温度试验参考:70℃—22hr100℃—70hr

压缩歪度试验仪英文介绍:

Compression And Deformation Tester

Model: SZ-6615

It′s used especially to test the static compression for tuber. Place one standard specimen between parallel flat plates, revolve then compress it a certain range of percentage and then put into the oven under the specified temperature for a certain time period then take it off cooling for 30 minutes to measure its thickness for calculating its permanent deformation rate.
Compression Deformation Rate Formula:
(Uncompressed Thickness - Compressed Thickness)÷(Uncompressed Thickness - Plate Thickness)×100

Ⅰ Test Standard:

1. GB/T 7759-1996 idt ISO 815:1999 硫化橡胶、热塑性橡胶常温、高温和低温下压缩长久变形测定

2. ASTM D 395-2008 橡胶性能的标准试验方法.压缩长久变形

3. JIS K 6262-2006 硫化或热塑性橡胶.在常温、高温或低温下的压缩长久变形测定规格参数

Ⅱ Specifications:

1. Model: SZ-6615

2. Rubber Specimen: Ø28.68, D12.7mm

3. Foam Plastic Specimen: L50×W50×D25mm

4. Dimension: W200×D120×H250mm

5. Weight:11kg

6. Temp. Test Reference:70—22hr,100—70hr
相关信息
标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!