发泡塑胶反复压缩试验机试验方法:取试样准确测量其厚度t0后置于本机两平行板之间,以每分钟60次的速度压缩试片厚度的50%,如此连续反复压缩80,000次后取出试样,放置30分钟后再测量其厚度t1,根据公式即可求出其压缩变形率tr:
tr=[(t0-t1)/t0] ×100%
发泡塑胶反复压缩试验机符合标准:
1. ISO 7214-2007 泡沫塑料.聚乙烯.试验方法
2. JIS K 6767-1976 泡沫塑料.聚乙烯.试验方法
发泡塑胶反复压缩试验机规格参数:
1. 试片:50×50×25mm
2. 压缩速率:60c.p.m.
3. 压缩行程:0~50mm可调
4. 压板间距:约200mm可调
5. 压板面积:300×300mm
6. 上压盘:V形排气沟,沟距19×19mm
7. 下压盘:透气孔289个,孔距19mm
8. 主机尺寸:约W600×D400×H750mm
9. 主机重量:约42kg
10. 电源要求:1∮ AC220V5A
发泡塑胶反复压缩试验机英文版
Foam Rubber Reciprocating Compression Tester
Model: SZ-6613
Put the specimen between two compression plates. Compress the specimen to 50% of its original thickness with the reciprocating compression speed of 60 times per minute till reaching 80000 times then take out and put aside the specimen for 30 minutes to measure the thickness of the specimen and calculate its permanent deformation rate.
Ⅰ Specifications:
1. Specimen: 50×50×25mm
2. Compression Speed:60c.p.m.
3. Stroke: 0~50mm Adjustable
4. Distance Between Compression Plates: Approx200mmAdjustable
5. Area of Compression Plate: 300×300mm
6. Upper Compression Pate: V-type exhaust groove, Pitch of grooves 19×19mm
7. Lower Compression Pate: Breathing holes 289, Pitch of holes19mm
8. Dimension: Approx W600×D400×H750mm
9. Weight: Approx42kg
10. Power: 1∮ AC220V5A
Ⅱ Test Standard:
1. ISO 7214-2007 泡沫塑料.聚乙烯.试验方法
2. JIS K 6767-1976 泡沫塑料.聚乙烯.试验方法