负荷热变形温度测定仪参考标准:
1. GB 2099.1-2008 家用和类似用途插头插座 第1部分:通用要求
2. UL 1581-2009 电线电缆和软线
3. JIS C 3005-2000 橡胶或塑料绝缘电线和电缆的试验方法
负荷热变形温度测定仪规格参数:
仪器型号 |
SZ-6807-1 |
SZ-6807-3 |
试验工位 |
1组 |
3组 |
温度范围 |
常温~200℃ |
|
试验砝码 |
50g、100g、200g、500g、1000g各1个 |
50g、100g、200g、500g、1000g各3个 |
厚度计 |
0.01~10mm |
|
内箱尺寸 |
W260×D400×H360mm |
W600×D400×H360mm |
内箱材质 |
SUS304不锈钢 |
|
外箱材质 |
1.5mm钢板,表面静电烤漆处理 |
|
保温材质 |
高密度石棉 |
|
主机尺寸 |
约W870×D470×H1350mm |
约W1100×D620×H1730mm |
主机重量 |
约61kg |
约113kg |
电源要求 |
1∮ AC220V7A |
1∮ AC220V15A |
负荷热变形温度测定仪英文介绍:
Parallel Plate Plastometer
Model: SZ-6807
This machine is used for the heat deformation test of power cords. Put specimen into test chamber of this machine under a certain temperature for 30 minutes, then clamp specimen between two parallel plates, the upper plates being subject to a constant load under the same temperature for 30 minutes.
Afterwards, the differential thickness before/after heating is divided by the thickness before heating and multiplied by% for being unit, that is deformation rate.
Ⅰ Test Standard:
1. GB 2099.1-2008 家用和类似用途插头插座 第1部分:通用要求
2. UL 1581-2009 电线电缆和软线
3. JIS C 3005-2000 橡胶或塑料绝缘电线和电缆的试验方法
Ⅱ Specifications:
Model |
SZ-6807-1 |
SZ-6807-3 |
Test Group |
1 Pcs |
3 Pcs |
Temp. Range |
Room Temp.~200℃ |
|
Weights |
50g, 100g, 200g, 500g, 1000g |
|
Micro-gauge |
0.01~10mm |
|
Interior Dimensions |
W260×D400×H360mm |
W600×D400×H360mm |
Dimension |
W870×D470×H1350mm |
W1210×D500×H1570mm |
Weight |
61kg |
113kg |
Power |
1∮ AC220V7A |
1∮ AC220V15A |
1. 至现场免费安装、调试,并培训2~5名操作人员,达到熟练操作水平;
2. 保修壹年,终身维修服务。壹年后如需更换零配件只核收成本费;
3. 开通电话服务专线,24小时内回复用户,72小时内上门调试维修;
4. 定期上门巡回服务,检查仪器运行状况,对仪器进行维护和保养;
5. 长期为用户免费提供产品使用说明书、维护咨询、技术咨询等服务;
6. 针对使用电脑软件控制的仪器,可定期免费提供软件升级和技术支持。
注:以上不区分直接销售和分销商销售